Luxury vinyl is everywhere in offices, retail, and hospitality, and it is not VCT. Treating it like VCT is a costly mistake. We care for LVT and LVP the way they're meant to be cared for: cleaned and protected, never stripped and waxed.
The factory wear layer is the finished surface. We never strip-and-wax luxury vinyl or run a high-speed burnisher over it, because the added layer and the heat can haze the surface, cause adhesion problems, and void the warranty. Protecting the wear layer is the whole job.
| Do | Don't |
|---|---|
| Dust mop and pH-neutral clean | Wax or strip-and-wax |
| Manufacturer-approved products | Harsh solvents, abrasives, or stripper |
| Felt pads and walk-off mats | High-speed burnishing |
| Approved finish only where allowed | Rubber-backed mats that can stain vinyl |
Deep scratches that reach the printed design layer can't be polished out; those planks are replaced, an advantage of the tile-and-plank format. More on construction and durability is in LVT vs. LVP.
Because LVT and LVP are no-wax, maintenance is about protecting the wear layer with the right chemistry and equipment, which is most of the battle. A light-touch maintenance program keeps it looking new.
Related: LVT vs. LVP (what is luxury vinyl), what is VCT, sealing vs. waxing, and maintenance programs.
Usually you shouldn't. Luxury vinyl has a no-wax factory wear layer; waxing isn't needed and can void the warranty. We clean and protect it with manufacturer-safe methods instead.
Sweep or dust mop to remove grit, then damp mop or auto-scrub with a pH-neutral, manufacturer-approved cleaner. No harsh strippers, solvents, or high-speed burnishing.
Yes. An improperly applied wax or finish can usually be removed with a manufacturer-safe method, then the floor is cleaned and protected the right way.
Proper deep cleaning restores the factory sheen. Where extra gloss or durability is wanted and the manufacturer allows it, a compatible finish can be applied.
Yes. LVT and LVP are the same product in different shapes and are cared for the same way.
Yes. The clear wear layer is the protective surface, so it's cleaned and protected, not stripped and waxed.
As a rule, 20 mil and up for general commercial and 28 to 40 mil for heavy traffic. More detail is in our LVT vs. LVP guide.
Floor-type pages must separate what should be waxed from what should not be waxed. VCT and some resilient floors may need finish systems; LVT, hardwood, marble, terrazzo, concrete, tile, rubber, and gym floors often need different cleaning, polishing, sealing, recoating, or maintenance methods.
Facility type, floor material, square footage, current condition, service needed, timing, access window, photos, traffic areas, safety concerns, and decision-maker contact details.
Photos are optional but helpful. A remote video walkthrough is a convenience option when condition or access is hard to explain. Larger schools, hospitals, universities, municipalities, portfolios, and complex projects may still need an in-person walkthrough.
Strip&Wax.com builds coverage carefully by collecting real facility requirements, provider service areas, capability details, and quote outcomes. The site focuses on accurate scope, clear expectations, and useful commercial floor-care guidance before an opportunity is routed.
Use these related pages to compare services, understand cost, plan facility-specific work, and route the right commercial floor-care opportunity.
A strong request gives a commercial floor-care team enough context to understand the building, the surface, the deadline, and the condition of the floor without making the form hard to finish.
Commercial floor-care buyers are usually trying to protect a facility, prepare for traffic, improve presentation, control safety risk, or restore floors before a deadline. The best quote requests connect the floor problem to the service, floor type, facility type, schedule, and access requirements.
High-value requests often include thousands of square feet, multiple rooms, heavy traffic lanes, old finish buildup, school or healthcare scheduling windows, retail entrances, warehouse walkways, municipal procurement steps, or a multi-location maintenance need. The buyer should understand that price changes with condition and access, not just square footage.
Useful quote notes include the facility type, floor material, current condition, deadline, preferred service window, whether furniture or shelving must move, whether the building needs low-odor products, and whether photos or a remote walkthrough can show the problem better than a written description.
Use the links below to compare scrub vs strip, review VCT floor care, check industry examples, estimate pricing with the cost calculator, or request a quote.
Use these resources to narrow the request into the right service, surface, and facility type: commercial floor waxing, floor stripping and waxing, VCT maintenance, scrub-and-recoat, burnishing, school floor care, healthcare floor care, retail floor care, and industrial floor maintenance. The buyer does not need every technical term before submitting the request.
Use this page to move from a general floor-care question into the right quote path. Commercial floor work gets easier to price when the buyer identifies the facility type, floor material, condition, timing, and project goal.
LVT & Luxury Vinyl Floor Care requires different decisions than a simple cleaning request. The quote should identify the floor material, current finish condition, traffic pattern, damaged areas, access windows, furniture movement, and whether the goal is gloss, protection, slip resistance, easier maintenance, or full restoration. Some floor types can be stripped and refinished; others should be cleaned, sealed, polished, recoated, or maintained without wax.
For buyers, the best first step is to submit the request with a city, phone number, approximate square footage, and photos if available. The follow-up can clarify whether the floor is VCT, LVT, concrete, terrazzo, tile, rubber, gym flooring, marble, or another surface, then route the scope toward the right commercial floor-care process.
Do not wait until every detail is perfect. Start the quote request with the basics, then add photos, measurements, floor type, or walkthrough notes when available. Larger schools, hospitals, municipal buildings, retail stores, warehouses, and multi-location properties can add scope details during follow-up.
Request a floor-care quoteTell us your facility, floor types, and square footage. We'll scope the work and send a written quote. Not sure what you have? Send a photo and we'll tell you.